- Contact Person : Ms. Chen Anna
- Company Name : Qingdao Icon Chemicals Co., Ltd.
- Tel : 86-532-84810168
- Fax : 86-532-84915346
- Address : Shandong,Qingdao,West of Da Zaoyuan, Licang District, QingDao City, Shandong Province, China
- Country/Region : China
- Zip : 266043
Water-based cutting oil
Water-soluble cutting oil
LY-Y303
LY-Y303 is one new type of water-soluble cutting oil with biological stability. Its unprecedented unique compound design, enables the water-soluble cutting oil to have good effect on capacity, lubrication, cooling, cleaning, rust prevention and anti-microorganism ability and so on. It satisfies the technological requirements of high speed, high accuracy, multi-purpose, high efficiency, the high flexible on the modernized engine bed, the machining center, the automatic production line. It is suitable for all kinds of cutting and grinding work on ferrous metal, copper alloy and aluminum alloy.
Characteristics1.1 Non-toxic, no stimulation, anti-soak the nature to be good, safe and reliable.
1.2 Good performance of E.P., lubrication, cooling, cleaning.
1.3 With extremely good rust prevention performance on the work piece and the equipment.
1.4 Solution pH value: 8.0~9.0
2. Usage method
Recommended concentration:
abrasive machining:3%~5%
broaching, reaming and tapping:10%~15%
cutting machining:5%~8%
If enhancing the EP, 15%~20%
Preparation method: first water, after oil. Dilute with the clean tapping water. Prepare the
certain concentration emulsion, stir evenly. Emulsify the emulsion completely and then
it can be used.
Preparation requirement: When preparing (replacing) new fluid, should drain out the old
fluid, the sweepings and the greasy dirt, and clean the liquid storage tank and pipeline
thoroughly with the circulating water. (If old fluid has been decayed, It is better to add
disinfectant) clean tank circularly with 0.5%~1% this diluent, finally prepare the work
solution and stir evenly.
Supply the new fluid: When the work solution needs to be supplied, during add water, also
should add the corresponding quantity original fluid in proportion to maintain the
enough density of the fluid.
3. Notes
The working fluid should maintain clean, ventilated, the machine tool should have the efficient system of filtration and removing dregs, then removing impurities promptly such as iron filings, oil slick and so on. If the machine tool does not start for a long time, should carry on the idle circulation and the oxygenation regularly for the working fluid, detect working fluid density and the pH value regularly, and supply or replace it with the new fluid at the right moment.
4. Storages
Seal it and store under the room temperature, store in dry, cool, the well ventilated storehouse, keep from the sun-scorched and rain-drenched in the storage and transportation. We suggest that the storing temperature is not higher than 40°C.
Water-based cutting oil